The control panel provides access to various menus to set up the machine or use the machine’s functions.

[Note]

  • Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.

  • Some menu names may differ from your machine depending on its options or the models.

Accessing the menu

  1. Press (Menu) button on the control panel.

  2. Press the arrows until the needed menu item appears and press OK.

  3. If the setting item has sub menus, repeat step 2.

  4. Press OK to save the selection.

  5. Press (Cancel) to return to the ready mode.

Information

(see Information)

Layout

(see Layout)

Paper

(see Paper)

Graphic

(see Graphic)

System Setup

(see System Setup)

Menu Map

Configuration

Supplies Info.

Demo Page

PCL Font

PS Font

Usage Counter

Account [a]

Network Conf.

Orientation

Portrait

Landscape

Margin

Common Margin

MP Tray

Tray 1

Tray 2 [b]

Tray 3 [b]

Tray 4 [b]

Emulation Mar.

Duplex

Copies

MP Tray

Tray 1

Tray 2 [b]

Tray 3 [b]

Tray 4 [b]

Paper Source

Tray 1

Tray 2 [b]

Tray 3 [b]

Tray 4 [b]

MP Tray

Auto

Resolution

Clear Text

Edge Enhance

Auto CR

Screen

Trapping

Date & Time

Clock Mode

Language

Power Save

Wakeup Event

Job Timeout

Default Paper

Altitude Adj.

Humidity

Auto Continue

Auto Tray Swi.

Paper Substit.

Tray Protect.

Tray Mode

SkipBlankPages

Maintenance

CLR Empty Msg. [c]

Supplies Life

Image Mgr.

TonerLow Alert

RAM Disk

Toner Save

Quiet Mode

Stacking Mode

Smart Duplex

Vapor Mode

Auto Power Off

[a] This is used only available when Job Accounting is enabled from the SyncThru™ Web Admin Service.

[b] This option is available when the optional tray is installed.

[c] This option only appears when small amount of toner is left in the cartridge.

Emulation

(see Emulation)

Image Mgr.

(see Image Mgr.)

Network

(see Network)

Direct USB [a]

(see Direct USB)

Job Manage [b]

(see Job Manage)

PrinterOn [c]

(see PrinterOn)

Emulation Type

Setup

Custom Color

Default

Print Density

AutoColor Reg.

Tone Adjust.

Auto Tone Adj.

TCP/IP (IPv4)

DHCP

BOOTP

Static

TCP/IP (IPv6)

IPv6 Protocol

DHCPv6 Config

Ethernet

Ethernet Port

Ethernet Speed

802.1x

Wi-Fi [d]

Wi-Fi On/Off

Wi-Fi Settings

WPS

Wi-Fi Direct

Wi-Fi Signal

CLR Wi-Fi Set.

Protocol Mgr.

NFC [d]

Network Conf.

Clear Settings

Print From

File Manage

Check Space

Active Job

Secured Job

Stored Job

Filing Policy

 

[a] This option is available when USB memory is inserted into the USB memory port on your machine.

[b] This option is available when the RAM disk is checked.

[c] This is available only when PrinterOn is enabled from SyncThru™ Web Service (see Registering your printer on the PrinterOn service). The sub menus that appear in this menu may differ based on whether or not the machine is connected to the PrinterOn server.

[d] This option is available when the optional Wi-Fi/NFC kit installed.
Search