Registering your -enabled Samsung printer on the service allows you to print documents on that printer from anywhere in the world. The service also enables you to print directly from the Mobile app on your iOS or Android device.
To use the feature, you must register your printer on the website (www.printeron.com).
Only administrators can register or configure a printer on the service.
This chapter does not explain all the features in the service. Instead, it explains how to register a printer on the service from the SyncThru™ Web Service.
For more information about the service, visit the website (www.printeron.com).
To register your printer on the service, you must activate the feature on the machine through the SyncThru™ Web Service.
Registering from Web Browser
![[Note]](../../common/icon_note.png){kind=icon}
|
|
|
Before you begin this process, make sure that your printer is turned on and can connect to the Internet. |
-
Check whether the machine is connected to the network.
-
Start a web browser such as Internet Explorer, Safari, or Firefox and enter your machine’s new IP address in the browser window.
For example,
-
Click in the upper right of the SyncThru™ Web Service website.
-
Type in the and , then click . If it’s your first time logging into SyncThru™ Web Service, type in the below default ID and password. We recommend you to change the default password for security reasons.
-
:
-
:
-
-
When the window opens, click > > .
-
Select check box to enable .
If a dialog box appears asking for permission to use your personal information, click to review the terms and conditions. Select the check box indicating you agree to the terms, and then click . When the dialog box closes, click .
is enabled automatically.
If has been disabled, you cannot connect to the cloud service. To enable , go to > > and select the check box.
-
Now your printer is registered with service.
For instruction on how to print using the service, refer to the service website (www.printeron.com).