Network

> > >


	Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see Menu overview).

To change the menu options:

Press (Menu) > Network on the control panel.


	You can also use this feature from the SyncThru™ Web Service. Open the Web browser from your networked computer and type the IP address of your machine. When SyncThru™ Web Service opens, click Settings > Network Settings (see SyncThru™ Web Service).

Option

Description

TCP/IP (IPv4)

Selects the appropriate protocol and configure parameters to use the network environment (see Setting IP address).


	There are many of parameters to be set. If you are not sure, leave as is, or consult the network administrator.

TCP/IP (IPv6)

Selects this option to use the network environment through IPv6 (see IPv6 configuration).

Ethernet

Configure the network transmission speed.


	Turn the power off and on after you change this option.

802.1x

You can selects the user authentication for network communication. For detailed information consult the network administrator.

Wi-Fi ^[a]

Selects this option to use the wireless network.

Clear Setting

Reverts the network settings to the default values.


	Turn the power off and on.

Selects this option to use the NFC feature.

Network Conf.

This list shows information on your machine’s network connection and configuration (see Printing a network configuration report).

Protocol Mgr.

You can set protocol.


	Turn the power off and on after you change this option.

^[a]This option is available when the optional Wi-Fi/NFC kit installed.