> Advanced > Useful Setting Menu > PrinterOn

PrinterOn

[Note]

Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see Menu overview).

To register your printer on the PrinterOn service, you must activate the PrinterOn feature on the machine through the SyncThru™ Web Service(see Registering your printer on the PrinterOn service).

This is available only when PrinterOn is enabled. The sub menus that appear in this menu may differ based on whether or not the machine is connected to the PrinterOn server.

[Note]

Before you can use the PrinterOn feature, you must configure the network connection of the machine. If you cannot connect to the machine after configuring its network connection, then you may have to check the external internet connection of the network.

When the PrinterOn feature is enabled, you can set it to Release Code mode or Auto mode. These modes can be changed on the PrinterOn server.

  • Release Code: Users must enter a Release Code to print a document sent through PrinterOn.

  • Auto: The machine automatically prints documents sent through PrinterOn without the user entering a Release Code.