> Basic > Menu Overview and Basic Setup > Machine’s basic settings

Machine’s basic settings

[Note]

You change the machine’s setting set in the machine from Samsung Easy Printer Manager or SyncThru™ Web Service.

  • If your machine is connected to the local, you can set the machine’s setting from Samsung Easy Printer Manager > Advanced Setting > Device Settings (see Using Samsung Easy Printer Manager).

  • If your machine is connected to the network, you can set the machine’s setting from SyncThru™ Web Service > Settings tab > Machine Settings (see SyncThru™ Web Service).

After installation is complete, you may want to set the machine's default settings.

To change the machine’s default settings, follow these steps:

[Note]

It may be necessary to press OK to navigate to lower-level menus for some models.

  1. Select (Menu) button on the control panel.

  2. Press System Setup.

  3. Select the option (language, data & time, clock mode, power save, altitude adjustment, etc.) you want, then press OK.

  4. Select the detailed option you want, then press OK.

  5. Press OK to save the selection.

  6. Press (Cancel) to return to ready mode.

[Note]

Refer to below links to set other settings useful for using the machine.