Fax features

Automatic redialing

When the number you have dialed is busy or there is no answer when you send a fax, the machine automatically redials the number. The redial time depends on the country's factory default setting.

When the display shows Retry Redial?, press (Start) button to redial the number without waiting. To cancel the automatic redialing, press (Stop or Stop/Clear) button.

To change the time interval between redials and the number of redial attempts.

Press (fax) > (Menu)> Fax Setup > Sending on the control panel.

OR

For the model with a touch screen, press (Setup) > Machine Setup > Next > Fax Setup on the touch screen.
Select Redial Times or Redial Term you want.
Select the option you want.

Redialing the fax number

Press (Redial/Pause) button on the control panel.
Select the fax number you want.

Ten recently sent fax numbers with ten received Caller IDs are shown.
When an original is loaded in the document feeder, the machine starts to scan and automatically begins to send.

If an original is placed on the scanner glass, select Yes to add another page. Load another original and press OK. When you have finished, select No when Another Page? appears.

Confirming a transmission

When the last page of your original has been sent successfully, the machine beeps and returns to ready mode.

When something goes wrong while sending your fax, an error message appears on the display. If you receive an error message, press (Stop or Stop/Clear) to clear the message and try to send the fax again.


	You can set your machine to print a confirmation report automatically each time sending a fax is completed. Press (fax) > (Menu) > Fax Setup > Sending > Fax Confirmation on the control panel. Press (Setup) > Machine Setup > Next > Fax Setup > Fax Confirmation on the touch screen.

Sending a fax in the computer


	This feature may not be available depending on model or optional goods (see Features by models).

You can send a fax from your computer without going to the machine.

To send a fax from your computer, the Samsung Network PC Fax program must be installed. This program will be installed when you installed the printer driver.

Open the document to be sent.
Select Print from the File menu.

The Print window will be displayed. It may look slightly different depending on your application.
Select Samsung Network PC Fax from the Print window
Click Print or OK.

Enter the recipients’ numbers and select the option


	Select the Help menu from the window and click on any option you want to know about.

Click Send.

Delaying a fax transmission

You can set your machine to send a fax at a later time when you will not be present. You cannot send a color fax using this feature.

Place a single document face down on the document glass, or load the documents face up into the document feeder.
Press (fax) on the control panel.
Adjust the resolution and the darkness to suit your fax needs.
Press (Menu) > Fax Feature > Delay Send on the control panel.

OR

For the model with a touch screen, select (Fax) > Delayed Send > Next on the touch screen. Go to step 8.
Enter the number of the receiving fax machine and press OK.
The display asks you to enter another fax number to send the document.

To enter more fax numbers, press OK when Yes highlights and repeat steps 5.


	You can add up to 10 destinations. Once you entered a group dial number, you cannot enter another group dial numbers anymore.

Enter the job name and the time.

For the model with a touch screen, enter the time > Next > press Direct Input or Fax List > enter the fax number using number keypad on the touch screen.


	If you set a time earlier than the current time, the fax will be sent at that time on the following day.

The original is scanned into memory before transmission.

The machine returns to ready mode. The display reminds you that you are in ready mode and that a delayed fax is set.


	You can check the list of delayed fax jobs. Press (Menu) > System Setup > Report > Fax Scheduled Jobs on the control panel. Press (Setup) > Machine Setup > Next > Reports > Fax Schedule Jobs on the touch screen.

Canceling a reserved fax job

Press (fax) > (Menu) > Fax Feature > Cancel Job on the control panel.

OR

For the model with a touch screen, press (Job Status) > Current Job > Next on the touch screen.
Select the fax job you want and press OK.

For the model with a touch screen, press (cancel) from fax job you want on the touch screen.
Press OK when Yes highlights.

For the model with a touch screen, press Yes when the confirmation windows appears.
Press (Stop or Stop/Clear) button or home () icon to return to ready mode.

Forwarding a sent fax to another destination

You can set the machine to forward the received or sent fax to other destination by a fax, an email or a server. If you are out of office but have to receive the fax, this feature may be useful.


	When you forward a fax by an email, you must first set the mail server and IP address in SyncThru™ Web Service (see Using SyncThru™ Web Service). Though you sent or received a color fax, the data is forwarded in grayscale.

Place a single document face down on the document glass, or load the documents face up into the document feeder.

Press (fax) > (Menu) > Fax Feature > Send Forward > Forward to Fax, Forward to Email or Forward to Server on the control panel.

OR

For the model with a touch screen, press (Setup) > Machine Setup > Next > Fax Setup > Send Forward > Forward to Fax, Forward to Email or Forward to Server on the touch screen.


	Forward options may not be available depending on model or optional goods (see Various features).

Enter the destination fax number, email address, or server address and press OK.

For the model with a touch screen, turn this option "On" and then enter the forward number
Press (Stop/Clear) button or home () icon to return to ready mode.

Subsequent sent faxes will be forwarded to the specified fax machine.

Forwarding a received fax

You can set the machine to forward the received or sent fax to other destination by a fax, an email or a server. If you are out of office but have to receive the fax, this feature may be useful.


	Though you sent or received a color fax, the data is forwarded in grayscale.

Press (fax) > (Menu) > Fax Feature > Receive Forward > Forward to Fax, Forward to PC , Forward to Email or Forward to Server on the control panel.

OR

For the model with a touch screen, press (Setup) > Machine Setup > Next > Fax Setup > Receive Forward > Forward to Fax, Forward to PC , Forward to Email or Forward to Server on the touch screen.


	Forward options may not be available depending on model or optional goods (see Various features). To set the machine to print out a fax when fax forwarding has been completed, select Forward&Print.

Enter the destination fax number, email address, or server address and press OK.

For the model with a touch screen, turn this option "On" and then enter the forward number
Enter the starting tim and ending time, then press OK.
Press (Stop/Clear) button or home () icon to return to ready mode.

Subsequent sent faxes will be forwarded to the specified fax machine.

Sending faxes on both sides of paper


	This is available only when you load originals into the document feeder. Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine. This feature may not be available depending on model or optional goods (see Features by models).

Place a single document face down on the document glass, or load the documents face up into the document feeder.

Press (fax) > Fax Feature > Duplex on the control panel.

OR

For the model with a touch screen, select (Fax) > select the menu you want > select Duplex from the sub‐menus > on the touch screen.

1 Sided: For originals that are printed on one isde only.
2 Sided: For originals that are printed on both sides.

2 ‐>1 Sided Rotated: For originals that are printed on both sides, but the back is rotated 180°.


	To use 2 Sided and 2 Sided Rotated, load the originals on the DADF. If the machine cannot detect the original on the DADF, it automatically changes the option to 1 Sided.

Press OK to save the selection.

For the model with a touch screen, press (back) to save the selection.

Receiving a fax in the computer


	This feature may not be available depending on model or optional goods (see Features by models). To use this feature, set the option on the control panel or touch screen: Press (fax) > (Menu) > Fax Feature > Receive Forward > Forward to PC > Forward the control panel. Press (Setup) > Machine Setup > Next > Fax Setup > Receive Forward > Forward to PC > Forward on the touch screen.

Open the Samsung Easy Printer Manager.
Select the appropriate machine from the Printer List.
Select Fax to PC Settings menu.
Use Enable Fax Receiving from Device to change the fax settings.
- Image Type: Convert the received faxes to PDF or TIFF.
- Save Location: Select location to save the converted faxes.
- Prefix: Select prefix.
- Print received fax: Set to print information for the received fax after receiving the fax.
- Notify me when complete: Set to show the popup window to notify receiving a fax.
- Open with default application: After receiving the fax, open it with default application.
- None: After receiving a fax, the machine does not notify the user or opens the application.
Press Save > OK.

Changing the receive modes

Press (fax) > (Menu) > Fax Setup > Receiving > Receive Mode on the control panel.

OR

For the model with a touch screen, press (Setup) > Machine Setup > Next > Fax Setup > Receive Mode on the touch screen.

Select the option you want.

Fax: Answers an incoming fax call and immediately goes into the fax reception mode.
Tel: Receives a fax by pressing (On Hook Dial) and then (Start) button.

Ans/Fax: Is for when an answering machine is attached to your machine. Your machine answers an incoming call, and the caller can leave a message on the answering machine. If the fax machine senses a fax tone on the line, the machine automatically switches to Fax mode to receive the fax.


	To use the Ans/Fax mode, attach an answering machine to the EXT socket on the back of your machine.

DRPD: You can receive a call using the Distinctive Ring Pattern Detection (DRPD) feature. Distinctive Ring is a telephone company service which enables an user to use a single telephone line to answer several different telephone numbers. For further details, see Receiving faxes using DRPD mode.


	This setting may not be available depending on your country.

Press OK to save the selection.

For the model with a touch screen, press (back) to save the selection.
Press (Stop/Clear) button or home () icon to return to ready mode.

Receiving manually in Tel mode

You can receive a fax call by pressing (On Hook Dial) button and then pressing (Start) when you hear a fax tone. If your machine has a handset, you can answer calls using the handset (see Features by models).

Receiving in Answering Machine/Fax mode

To use this mode, you must attach an answering machine to the EXT. socket on the back of your machine. If the caller leaves a message, the answering machine stores the message. If your machine detects a fax tone on the line, it automatically starts to receive the fax.

If you have set your machine to this mode and your answering machine is switched off, or no answering machine is connected to EXT. socket, your machine automatically goes into Fax mode after a predefined number of rings.
If the answering machine has a user‐selectable ring counter, set the machine to answer incoming calls within 1 ring.
If the machine is in Tel mode, disconnect or switch off the answering machine with the fax machine. Otherwise, the outgoing message from the answering machine will interrupt your phone conversation.

Receiving faxes with an extension telephone

When you are using an extension telephone connected to the EXT. socket, you can receive a fax from someone you are talking to on the extension telephone, without going to the fax machine.

When you receive a call on the extension phone and hear fax tones, press the keys *9* on the extension phone. The machine receives the fax.

*9* is the remote receive code preset at the factory. The first and the last asterisks are fixed, but you can change the middle number to whatever you want.


	While you are talking over the telephone connected to the EXT. socket, copy and scan features are not available.

Receiving faxes using DRPD mode

This setting may not be available depending on your country. Distinctive Ring is a telephone company service which enables an user to use a single telephone line to answer several different telephone numbers. This feature is often used by answering services who answer telephones for many different clients and need to know which number someone is calling in on to properly answer the phone.


	This setting may not be available depending on your country.

Select (fax) > (Menu) > Fax Setup > Receiving > Receive Mode > DRPD on the control panel.

OR

For the model with a touch screen, press (Setup) > Machine Setup > Next > Fax Setup > Receive Mode > DRPD on the touch screen.
Call your fax number from another telephone.
When your machine begins to ring, do not answer the call. The machine requires several rings to learn the pattern.

The machine displays Waiting Ring while recording ring pattern, when completed learning, the display shows CompletedDRPD Setup.

Press OK when DRPD appears and start over from step 2.

DRPD must be set up again if you re‐assign your fax number, or connect the machine to another telephone line.
After DRPD has been set up, call your fax number again to verify that the machine answers with a fax tone. Then have a call placed to a different number assigned to that same line to be sure the call is forwarded to the extension telephone or answering machine plugged into the EXT socket.

Receiving in secure receiving mode


	This feature may not be available depending on model or optional goods (see Features by models).

You may need to prevent your received faxes from being accessed by unauthorized people. Turn on secure receiving mode, then all incoming faxes go into memory. You can print the incoming faxes by entering the password.


	To use the secure receiving mode: Press (fax) > (Menu) > Fax Feature > Secure Receive > On on the control panel. Press (Setup) > Machine Setup > Next > Fax Setup > Secure Receive on the touch screen.

Printing received faxes

Select (fax) > (Menu) > Fax Feature > Secure Receive > Print on the control panel.

OR

For the model with a touch screen, press (Setup) > Machine Setup > Next > Fax Setup > Secure Receive > Print on the touch screen.
Enter a four‐digit password and press OK or Print.
The machine prints all of the faxes stored in memory.

Printing faxes on both sides of the paper


	Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine. This feature may not be available depending on model or optional goods (see Features by models).

Place a single document face down on the document glass, or load the documents face up into the document feeder.
Press (fax) > (Menu) > Fax Setup > Receiving > Duplex Print on the control panel.

For the model with a touch screen, select (Fax) > select the menu you want > select Duplex from the sub‐menus > on the touch screen.
- Off: Prints in Normal mode.
- Long Edge: Prints pages to be read like a book.
- Short Edge: Prints pages to be read by flipping like a note pad.
Press OK to save the selection.

For the model with a touch screen, press (back) to save the selection.

Receiving faxes in memory

Since your machine is a multi‐tasking device, it can receive faxes while you are making copies or printing. If you receive a fax while you are copying or printing, your machine stores incoming faxes in its memory. Then, as soon as you finish copying or printing, the machine automatically prints the fax.


	If fax is received and being printed, other copy and print jobs cannot be processed at the same time.


	For basic faxing features, refer to the Basic Guide (see Basic faxing).