Installing accessories

> > >

Installing accessories

Precautions

Disconnect the power cord

Never remove the control board cover while the power is turned on.

To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing ANY internal or external accessories.
Discharge static electricity

The control board and internal accessories (network interface card or memory module) are sensitive to static electricity. Before installing or removing any internal accessories, discharge static electricity from your body by touching something metal, such as the metal back plate on any device plugged into a grounded power source. If you walk around before finishing the installation, repeat this procedure to discharge any static electricity again.


	When installing accessories, the battery inside the machine is a service component. Do not change it by yourself. There is a risk of an explosion if battery is replaced by an incorrect type. Your service provider should remove the old battery from your device and dispose of in ordinance with state regulations.

Setting Device Options

When you install the optional devices such as optional tray, memory, etc, this machine automatically detects and sets the optional devices. If you cannot use the optional devices you installed in this driver, you can set the optional devices in Device Options.

For Windows XP Service Pack 3/Server 2003, from the Start menu, select Printer.

For Windows Server 2008/Vista, from the Start menu, select Control Panel > Hardware and Sound > Printers.
For Windows 7, from the Start menu, select Control Panel > Devices and Printers.

For Windows 8, from the Charms, select Search > Settings > Control Panel > Devices and Printers.
For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers.

For Windows 10 / Windows Server 2016

From task bar, type in Devices and Printers in Search input area. Press the Enter key.

From the Start () icon, select Settings > Devices > Printers & scanners >Devices and Printers.


	Right-click the Start () icon, you can select Control Panel > Devices and Printers.

Right-click your machine.

For Windows XP Service Pack 3/2003/2008/Vista, press Properties.

For Windows 7/Windows 8/Windows Server 2008 R2/Windows 10 / Windows Server 2016, from context menus, select the Printer properties.


	If Printer properties item has ▶ mark, you can select other printer drivers connected with selected printer.

Select Device Options.


	The Properties window may differ depending on the driver or operating system you are using.

Select the appropriate option.
Click OK until you exit the Properties or Printer properties window.